XIEGU/Xiegu G90S/G90N SDR Portable Backpack 20W Shortwave Radio Panel Separation Built-in Sky Tune
Improvements of G90N:
1. The main structure of the fuselage is changed to an H-shaped structure, and the main board and power board are completely isolated to improve anti-interference performance.
2. New cooling air ducts are added at the bottom and tail of the machine to increase air convection and improve heat dissipation capacity.
3. A new machine head output speaker/headphone switch is added, which can directly drive the GY03 speaker.
4. The power plug was changed to an Anderson socket and a thicker power cord was used.
5. The speaker structure is optimized to improve the output sound quality of the speakers in the machine and improve the listening experience.
6. Several output sockets at the rear use better quality connectors.
7. Added four machine feet at the bottom of the host.
8. The maximum output power is changed to 10W for the convenience of enthusiasts.
9. The circuit is optimized, the signal-to-noise ratio is improved, and the recognition of weak signals is improved.
Technical parameter
Transmit power: 20W (SSB/CW), 5W (AM carrier)@13.8VDC
Working current: 700mA (with signal reception), 6A (20W transmission)
Frequency range: transmit 1.8-30MHz (for amateur band), receive: 0.5-30MHz
Working mode: SSB, CW, AM, FM
Frequency stability: ±1.5ppm@25℃: 1ppm/hour 10~60 minutes after power on
Minimum step: 10Hz
Rated voltage: 10.5~16.5V DC, negative ground
Audio rated power: 0.5W/8Ω 10%THD
Working temperature: 0℃~+50℃
Antenna interface: M type
Antenna impedance: 50Ω
Appearance size: 120*45*210mm (excluding knobs and joints)
Weight of the whole machine: about 1.63KG (only host)
Basic instructions:
The G90S is a portable 20W amateur radio shortwave transceiver with SDR architecture. It is a new member of the Xiegu product family and the first portable SDR model of the G series.
G90S is based on 24bit-CODEC sampling, which brings excellent transceiver performance and highly configurable functional experience. The design of the detachable head allows you to flexibly arrange the position of the main unit. Built-in high-performance automatic air conditioning, ready to meet your call needs. Setting up and adjusting the antenna is no longer a problem.
·High-performance RF front-end
Covering the frequency range of 0.5~30MHz, three working modes of SSB/CW/AM
1.8-inch high-brightness color TFT LCD display
·±24KHz bandwidth spectrum display, waterfall display
Software-defined narrowband filter (CW mode down to 50Hz)
· Detachable head design
·Built-in CW decoder
· Built-in standing wave scanner
Built-in high-efficiency automatic antenna tuner
G90S has a built-in variable bandwidth digital filter, which can continuously adjust the filter bandwidth to improve the immunity and selectivity of the walkie-talkie.
The G90S walkie-talkie can display the spectrum and waterfall chart of the received signal, and can quickly observe whether there is a communication signal on the adjacent frequency, which is convenient for users to quickly track and switch frequencies, and quickly follow the channel.
It has a wealth of expansion interfaces, KEY interface can be used to connect CW keys, COMM interface is used for firmware update and upgrade, I/Q signal interface is convenient to connect XDT1 and computer SDR spectrum adapter, ACC interface can be used for data communication with Xiegu CE19 adapter card Transmit audio signal or connect XPA125B amplifier.
Included accessories
1. Multifunctional microphone
2. Separate the head fixing studs
3. Hex key
4. DB9 extension cable
5. Power cord
6.USB data cable
7. Operating Manual
8. Qualifications
Reviews
There are no reviews yet.