Motorola DP4600e UHF VHF Digital Portable Walkie-Talkie Limited Keypad DMR Handeld 2-ways Radio
Accessories
- Antenna
- Battery
- Charger
- Power adapter
- Dust cover
- Clip
- Manual
Specifications
| General | |||
| VHF | UHF | ||
| Channel Capacity | 1000 | ||
| Frequency | 136-174 MHz | 403-527 MHz | |
| NiMH (1400mAh) battery | (HxWxL) | 130.3 x 55.2 x 38.7 mm (5.13 x 2.17 x 1.52 inch) |
|
| Weight | 426.5 g (15.04 oz) | ||
| IMPRES Li-ion Slim (1600mAh) battery | (HxWxL) | 130.3 x 55.2 x 35.8 mm (5.13 x 2.17 x 1.41 inch) |
|
| Weight | 336.5 g (11.87 oz) | ||
| IMPRES Hi-Cap Li-ion (2250 mAh) battery | (HxWxL) | 130.3 x 55.2 x 41.1 mm (5.13 x 2.17 x 1.62 inch) |
|
| Weight | 356.5 g (12.58 oz) | ||
| IMPRES Hi-Cap Li-ion FM (2350 mAh) battery | (HxWxL) | 130.3 x 55.2 x 41.1 mm (5.13 x 2.17 x 1.62 inch) |
|
| Weight | 366.5 g (12.93 oz) | ||
| Power Supply | 7.5V (Nominal) | ||
| Operating Temperature | -30°~ +60° C | ||
| Battery | |||
| Average Battery Life | 5/5/90 duty cycle with carrier squelch and transmitter in high power | ||
| NiMH (1400mAh) battery | Analog: 7 hrs/ Digital: 10.2 hrs | ||
| IMPRES Li-ion Slim (1600mAh) battery | Analog: 8 hrs/ Digital: 11.8 hrs | ||
| IMPRES Hi-Cap Li-ion (2250 mAh) battery | Analog: 11.5 hrs/ Digital: 17 hrs | ||
| IMPRES Hi-Cap Li-ion FM (2350 mAh) battery | Analog: 12.3 hrs/ Digital: 18.1 hrs | ||
| Receiver | |||
| VHF | UHF | ||
| Frequencies | 136-174 MHz | 403-527 MHz | |
| Channel Spacing | 12.5 / 20 / 25 kHz | ||
| Frequency Stability | ± 0.5 ppm | ||
| Analog Sensitivity (12dB SINAD) | 0.3uV , 0.22uV (typical) | ||
| Digital Sensitivity | 0.25 uV (0.19 uV typical) | ||
| Intermodulation (TIA603D) | 70 dB | ||
| Adjacent Channel Selectivity (TIA603A)-1T | 60dB @ 12.5kHz / 70dB @ 20/25 kHz | ||
| Adjacent Channel Selectivity (TIA603D)-2T | 45dB @ 12.5kHz / 70dB @ 20/25 kHz | ||
| Spurious Rejection (TIA603D) | 70 dB | ||
| Rated Audio | 0.5 W | ||
| Audio Distortion @ Rated Audio | 5% (3% typical) | ||
| Hum and Noise | -40 dB @ 12.5 kHz / -45 dB @ 20/25 kHz | ||
| Audio Response | TIA603D | ||
| Conducted Spurious Emissions (TIA603D) | -57 dBm | ||
| Transmitter | |||
| VHF | UHF | ||
| Frequencies | 136-174 MHz | 403-527 MHz | |
| Channel Spacing | 12.5 / 20 / 25 kHz | ||
| Frequency Stability | ± 0.5 ppm | ||
| Low Power Output | 1 W | 1 W | |
| High Power Output | 5W | 4W | |
| Modulation Limiting | ± 2.5 kHz @ 12.5 kHz | ||
| ±4.0kHz @ 20 kHz | |||
| ± 5.0 kHz @ 25 kHz | |||
| FM Hum and Noise | -40 dB @ 12.5 kHz | ||
| -45 dB@ 20/25 kHz | |||
| Conducted / Radiated Emission | -36 dBm < 1 GHz | ||
| -30 dBm > 1 GHz | |||
| Adjacent Channel Power | 60 dB @ 12.5 kHz | ||
| 70 dB @ 20/25 kHz | |||
| Audio Response | TIA603D | ||
| Audio Distortion | 3% | ||
| 4FSK Digital Modulation | 12.5 kHz Data: 7K60F1D and 7K60FXD 12.5 kHz Voice: 7K60F1E and 7K60FXE Combination of 12.5 kHz Voice and Data: 7K60F1W |
||
| Digital Vocoder Type | AMBE +2™ | ||
| Digital Protocol | ETSI TS 102 361-1, -2, -3 | ||
| Environmental Specifications | |||
| Operating Temperature | -30℃ ~ +60℃ | ||
| Storage Temperature | -40℃ ~ +85℃ | ||
| Thermal Shock | Per MIL-STD | ||
| Humidity | Per MIL-STD | ||
| ESD | IEC 61000-4-2（level 3） | ||
| Dust & Water Intrusion | IEC60529 – IP57 | ||
Reviews
There are no reviews yet.